Buster + Punch Linear Boiling Water Tap

Buster and Punch Linear Boiling Water Tap

TEMPERATURE RANGE

• Temperature range: 5 - 98 °C

• Maximum hot water temperature 98 °C

• Water tank will automatically boost the temperature back up to 98 °C whenever it falls below 95 °C.

• Heating water to 98 °C is not only more energy efficient (than heating to 100 °C) but also provides as safer water stream with no spitting, reducing injury.

• In the event of a power cut, please allow time for the tank to reach the desired temperature.

GUARANTEE

• Tap and tank both come with a 2 year guarantee

MOUNTED SURFACE / WORKTOP

• Minimum thickness of worktop 0.5 mm, maximum thickness of worktop 45 m (with supplied fixings)

RECOMMENDED WATER PRESSURE

• Tap: Minimum: 7.25 PSI / 0.5 BAR, Maximum: 72 PSI / 5 BAR

• Tank: Minimum: 21.75 PSI / 1 BAR, Maximum: 72 PSI / 5 BAR

• Exceeding these temperatures or water pressures can result in damage to the tap and tank. A pressure reducing valve will be required in high water pressure situations. Click here to buy a pressure regulator valve.

CONNECTOR HOSE DIAMETER

• UK flexible connector hose diameter: 1/2” ø

ADDITIONAL INFORMATION

• Mixed water handle operation range: 0-90°

• 360 degree swivel spout

• Water tank capacity 2.4L

• Filter comes with a phosphate bead core which reduces scaling and bacteria

APPROVED CERTIFICATION

• All Buster + Punch mixer taps conform to standard EN817.

• WRAS approved tank - can be installed in new build homes.

PLEASE NOTE

• In some cases, local housing regulations may require mixer taps to be of a higher minimum water pressure standard. In this instance, we would recommend consulting with a certified plumber about installing a pressure regulator or similar device.

• Please register your tap immediately. The Water Filter must be replaced every six months or the guarantee will become invalid.