Buster + Punch Cross Knurled Mixer Tap

Buster and Punch Cross Mixer Tap

This tap has been cast, sand-blasted and machined from solid metal in Italy.

It features the Buster + Punch signature cross-knurl pattern and is refined by hand. 

A kitchen mixer tap with a single lever action that mixes water from the hot and cold pipes in your kitchen.

  Maximum thickness of mounting surface 40mm, with supplied fixings

  Minimum recommended water pressure: 7.25 PSI (0.5 BAR)

  Maximum recommended water pressure: 72 PSI (5 BAR)

  Recommended maximum hot water temperature: 70°C (158°F)

  Recommended temperature range: 5 – 60°C (41 – 140°F)

Note: exceeding these temperatures or water pressures can result in damage to the tap. A pressure reducing valve may be required to be fitted in high water pressure situations.

Only available for sale in the UK

All Buster + Punch mixer taps conform to standard EN817.

In some cases, local housing regulations may require mixer taps to be of a higher minimum water pressure standard. In this instance we would recommend consulting with a certified plumber about installing a pressure regulator or similar device.

Mixer taps are tested to work with a max. pressure of 10 bar (1000 kPa) and recommended working pressure range is 1.0 – 5.0 bar (100 kPa – 500 kPa).